BlueSCSI Firmware Update Package
================================

Do NOT extract this ZIP file.

This .zip is a firmware updater package for BlueSCSI. To install it:

  1. Copy the ENTIRE .zip file (not its contents) to the root of your
     SD card
  2. Insert the SD card into your BlueSCSI and power it on
  3. The firmware auto-detects the file, extracts the correct image
     for your specific board, flashes it, and reboots
  4. The .zip is deleted from the SD card after a successful update

If you extracted this archive by mistake, no harm done -- just re-download
the original .zip from the release page and drop it on your SD card.

The .bin files inside this archive are raw firmware images intended only
for the on-device updater. They cannot be flashed with drag-and-drop or
UF2 tools.

If a front panel is connected, the updater also extracts the matching
front panel firmware (bluescsi-*-frontpanel.bin) to /firmware/ on the SD
card; the panel then updates itself automatically.

For the full update guide, including USB/UF2 flashing and troubleshooting,
see:

  https://github.com/BlueSCSI/BlueSCSI-v2/wiki/Updating-Firmware
